10mA Hook Electric Power Tester Leakage Current For Monitoring Stations
VICTOR 7100B Hook Type Large Current Meter Cable Leakage Current Inspector AC 0~9999A ForSubstation Power plants Monitoring stations
Introduction
This hook type current meter is also called the hook type cable leakage detector. It consists of a large caliber hook ammeter, insulation rod
and other spare parts, Hook type ammeter has built-in double layer flexible coil: portable, high precision, wide range and good linearity. It can test the current, load and leakage current of the bared cable below 1000V or insulated busbar under 10kV, and it is especially suitable for the leakage
inspection of the downhole and wild multi-core cable. The current range is AC 0 to 9999A. The maximum outer diameter of wire or cable can be 168mm.The maximum size of the busbar can be measured by 168mm * 245mm.
Hook ammeter can be hung for online testing, LCD display, clear and intuitive. The insulating rod is light and has the characteristics of moisture
resistance, high temperature resistance, anti-impact and high insulation. The instrument also has data saving function. widely used in substations, power plants, industrial and mining enterprises and testing stations, electrician maintenance departments for current detection and field electrician
operation.
Technical Data
| |
VICTOR 7100B |
| Function |
ACA, leakage current, load current on-line test, suitable for electricity leakage patrol inspection of down hole and outdoor multi-conductor thick cable |
| Power Source |
DC 3.7V chargeable lithium battery, USB charging portal, working continuously for 10h |
| Display Mode |
Four digital LCD display, backlight function, suitable for dark place |
| Tested Line Diameter |
Ф168mm Conductor, cable or 168mm×245mm bus bar |
| Measurement Range |
Current: AC 10mA~9999A(50~60Hz automatically) |
| Resolution |
10mA |
| Current Accuracy |
10mA~999A, ±2%±5dgt |
| 1000A~2999A, ±3%±5dgt |
| 3000A~9999A, ±4%±5dgt |
| Size of Insulation Rod |
300mm |
| Instrument Size |
Length width thickness 310mm×270mm×52mm |
| Line Voltage |
bare wire test 1000V below, less than 110kV with a safety insulation sheath wire. (operating with an insulation rod) |
| Automatic Shutdown |
About 15mins after startup, the instrument will be automatically shut down to reduce battery consumption |
| Instrument Mass |
Instrument: 496g(include battery); Total mass: 2.3kg (including insulation rod and instrument box) |
Product Tags:
|
|
10mA Hook Electric Power Tester Leakage Current For Monitoring Stations Images
|
