This Wireless High Voltage Phase Detector is designed specially for high voltage phase detection, break through the traditional phase detection voltage limitation, can conduct low voltage phase detection, Fully realized 200V~220kV voltage automatic phase detection (such as 400V, 10kV, 35kV, 66kV, 110kV, 220kV), there is no need to purchase multiple sets of phase detectors according to the voltage level, save cost, reduce the carrying, and time-saving. For the phase of high voltage line (voltage over 400V), the detector's metal detector can be gradually close to the wire. When the electric field signal is induced, the phase detection can be completed without the direct contact with high voltage wire! When the bare wire voltage exceeds 35kV, a non-contact phase detect must be used.It also has the functions of testing phase, frequency, phase sequence, checking the electricity, and judging transformer groups.
This wireless high voltage phase detector is composed of a host machine, detector, telescopic rod, insulation monitoring software, USB communication line, linear wireless signal transmission distance of about 30 meters, adopts 3.5 inch color LCD screen, you can display with phase, frequency, phase and phase results; vector instructions, phase indication, clear and intuitive, with "X; normal signal, Y signal is normal, in-phase and out of phase, voice prompt function, make the test more easily.
The monitoring software has the functions of online real-time monitoring, historical data query, vector diagram instruction and phase indication. It has the functions of reading, searching, saving and printing historical data.
Technical Specification
| |
VICTOR 1600 |
| Power Source |
Meter: DC9V 6 nodes AA alkaline battery LR6; Detector: Zinc manganese dry battery 6F22, 9V |
| Phase Checking Method |
Contact phase checking: When the bare wire voltage is less than 35kV, or less than 220kV with a safety insulation sheath wire, adopt contact phase checking. (operating with an insulation rod) |
| Noncontact phase checking: When the bare wire voltage is more than 35kV, adopt noncontact phase checking. The probe gradually approach wire phase checking |
| Transmission Method |
wireless transmission, about 30 meters distance of straight transmission |
| Phase Judge |
In phase:-25°～25°; out of phase: 95°～145° and 215°～265° |
| Phase Checking Voltage |
200V~220kV |
| Phase Range |
0.0°～360.0°; accurate: ≤±12° ; Resolution: 0.1° |
| Frequency Range |
45.0Hz～65.0Hz; accurate: ≤±2Hz ; Resolution: 0.1Hz |
| Emission Frequency |
433MHz, 315MHz |
| LCD |
3.5-inch color LCD; display domain: 71mm×51mm |
| Phase Indicator |
Phasor diagram and digital display meanwhile |
| Working Indicator |
sound-light indication function, red double flashing lights and buzz like "beep - beep - beep" |
| Display Rate |
2 times/s |
| Data Storage |
9999sets (power down or replace battery will not lose data) |
| Automatic Shutdown |
About 5mins after startup, the instrument will be automatically shut down |
